I tried using a digital camera light that strongly shines a subject with 56 LEDs

Accessories for digital cameras that allow you to shoot photos and videos brightly with LED lights that can be constantly litLUNATEMIS LED light 56 ​​light (4980 yen including tax)",BeforearticleThere was no physical thing when it was done, but since I was able to purchase this time, I tried to verify the usability in practice.

By using LEDs with lower power consumption than incandescent light bulbs etc., we realized miniaturization of lights. The package also says "long life", "power saving".


According to the description in the manual, it is possible to irradiate the light towards the front of about 40 degrees. Continuous usable time is 150 minutes, weighs 133 g without batteries.


Viewed from the front. There is no heavy feeling because it is made of plastic.


Three filters are included. From the left is Amber, Purple, Matt.


There is an illuminance adjustment dial on the back left, you can adjust the light intensity in a stepless manner.


Driven by 3 AA batteries.


There was a slit for waste heat at the top of the main unit.


There is an illuminance adjustment dial on the back, and the light intensity can be adjusted steplessly.


Attach it to the metal fitting "Hot shoe" for attaching the accessories at the top of the camera. It is possible to attach it to most of the general digi-chan, lens interchangeable mirrorless, video.


I installed it. It is firmly stable without grinding.


It is possible to wear it even in full-scale digiichi.


I tried to shine. Since it carries 56 LEDs, it is so bright that you can not see directly from the front. I do not recommend taking pictures of people by approaching from the front at night.


It is actually being used. Since the flash will only brighten for a moment, you can not create a composition with light applied, but this light is useful if you can set various settings in a bright state.


First of all I shoot without lights. The camera used for shooting from here is Panasonic's "LIMIX DMC-GH 2"is.


No filter, shooting at maximum illumination. It became somewhat bluish-tinged color


Shooting with a "mat" filter that diffuses light and creates a soft impression. You can see that the desk's sharpness is being reduced more than when there is no filter.


I shot with the filter of "Amber". It is said that it is reproducing the color tone close to the light bulb color. Slightly less bright than filter free.

I shot with the "purple" filter. There is no purple feeling especially, the white finish of the wall is beautifully reproduced natural finish.